extrusion moulding
英 [ɪkˈstruːʒn ˈməʊldɪŋ]
美 [ɪkˈstruːʒn ˈmoʊldɪŋ]
挤压模塑；挤压造型
双语例句
- The ceramics core was prepared by extrusion moulding applied in the titanium alloy golf club head.
利用挤压成型的方法，制备了应用于钛合金高尔夫球杆头精密铸件的陶瓷型芯。 - Study on Extrusion Moulding of UHMWPE/ PP Assisted by Supercritical Carbon Dioxide
超临界CO2辅助UHMWPE/PP挤出成型研究 - The isotropic plastic magnetic strip used for refrigerators, produced by extrusion moulding with CPE ( chlorinated polyethylene) and magnetic particles as raw material has been introduced.
介绍以氯化聚乙烯、磁粉等为原料，采用挤出工艺成型电冰箱用的各向同性磁性塑料条。 - This article is about the new development in extrusion moulding field, and introduces the new extrusion moulding technique and equipment at K2001.
综述了挤出成型技术领域近年来一些新的发展趋势。 - The new extrusion equipment has been designed to research the rheological behavior of LLDPE extrusion moulding in complex stress filed of vibration and shearing.
利用振动剪切挤出装置研究了线性低密度聚乙烯（LLDPE）在振动与旋转剪切复合力场中挤出成型时的流变行为。 - The raw materials, extrusion pressure, pressure holding time and molding temperature during extrusion moulding have great effects on the quality of products.
挤压成型过程中原材料、挤压力、保压时间和成型温度对制品的品质影响较大。 - Rheological Behavior of LLDPE Extrusion Moulding in Complex Field of Vibration and Shearing
LLDPE在振动剪切复合场中挤出成型的流变行为 - Development of extrusion moulding technology transparent soft PVC sheets on equipment for extrusion and forming of rigid PVC plates was described, with emphasis on the flow process, equipment, recipe, process conditions, properties and the specifications of the products.
采用生产PVC硬片的挤出成型设备来开发生产PVC透明软片。主要介绍了工艺流程、成型设备、配方、工艺条件、产品性能及规格。 - Improvement of Extrusion Moulding Technology of LDPE Foamed Sheet
低密度聚乙烯泡沫片材挤出成型技术的改进 - It prepared the thermoplastic pellet by blending wood flour, PVC and coupling agent, and then prepared wood-plastic decorative composites by meams of extrusion moulding method.
通过偶联剂等助剂，将木粉和聚氯乙烯材料混合，制成可塑性胶粒，用挤出成型的方法制成木塑复合装饰材料。 - Development of process and theory on ceramics pastes extrusion moulding
陶瓷材料挤出成型工艺与理论研究进展 - Variational Method on Drawing Die Design of Special-shaped Steel Problems Concerning the Design of An Extrusion Moulding Machine Nose
异型材拉拔模具设计的变分方法异型材挤出成型机头设计中需注意的问题 - This paper introduced the principle and equipment of continuous extrusion moulding of microcellular plastics as well as the advantage of using supercritical CO2 fluid in the preparation of microcellular plastics.
介绍了微孔塑料连续挤出成型的原理和设备以及在微孔聚合物制备中应用超临界CO2的优点。 - Development of Polypropylene High Density Foamed Sheet Improvement of Extrusion Moulding Technology of LDPE Foamed Sheet
聚丙烯低发泡片材的研制低密度聚乙烯泡沫片材挤出成型技术的改进 - This paper introduces structure of all-plastic commutator and its cold extrusion moulding technics, emphasizes on the essentials in its mould design.
介绍全塑换向器的结构和它的冷挤成型工艺，同时详细叙述其模具设计中的要点。 - A Study on Deformation Regularity of Extrusion Moulding for Cooper& clad Aluminum Bimetal Material
Cu/Al双金属材料挤压成形的变形规律研究 - In the extrusion moulding, the quality and quantity of the products are affected violently by the distribution of the temperature, pressure and velocity.
在挤出口模设计中要考虑的参数很多，如温度、压力、速度，这些参数的选择对挤出制品的产量和质量都有很重要的影响。 - The extrusion moulding technology and equipments for transparent rigid PVC sheets were described in this paper, with em-phasis on the flow sheet, equipments, formulation, process conditions, the specification and properties of the products.
本文分别从挤出工艺及设备介绍了PVC透明硬片的挤出成型。主要叙述了工艺流程、所用主要设备、配方、工艺条件以及产品的规格和性能。 - Compared with press moulding mainly used in our country, extrusion moulding can realize continuous production with short period and high efficiency.
在成型方法上，目前国内主要采用压制成型，而相对来说挤出成型可实现连续生产，生产周期短，效率高。 - This paper introduces the production technology of the injection and extrusion moulding of Nylon 11. The problems emerged in the production and their solving methods are discussed.
介绍尼龙11的注射成型和挤出成型工艺，并讨论了生产中易出现的问题及其解决办法。 - Therefore extrusion moulding is a prefer process method.
因此挤出成型是生产木塑复合材料的理想的成型方法。 - The experimental stress analysis in polymer extrusion moulding processing
聚合物挤出成型过程的实验应力分析 - The technology of PTFE dispersion resin press mould ( also called paste extrusion moulding) is introduced.
介绍了聚四氟乙烯（PTFE）分散树脂推压成型（也称糊膏挤压成型）制品的工艺技术。 - Use of the Slip-line Method in Calculating Extrusion Force of the Steel Helmet with Cold Extrusion Moulding
计算冷挤压成型钢盔挤压力的滑移线法 - To control the melt flowing and foaming of polymer are the key factors to ensure the quality of products during the extrusion moulding of the integral door leaf of low foamed rigid PVC.
在低发泡硬质聚氯乙烯整体门板的挤出成型中，控制聚合物熔体的流动和发泡是保证产品质量的关键。 - Design of Extrusion Moulding for Aluminum Alloy Tubing Bars
铝合金空心型材挤压模设计 - Special Dual Plunger Extrusion Moulding Technology for UHMWPE
双柱塞超高分子量聚乙烯特殊挤出成型工艺研究 - The injection and extrusion moulding techniques of nylon-11
尼龙11的注射成型与挤出成型技术 - The EPDM was vulcanized by reaction extrusion moulding.
采用反应挤出法对EPDM进行动态硫化。 - The optimum melt temperature was 210 ℃ during extrusion moulding.
反应挤出时最佳熔体温度为210℃。